-->

May 31, 2016

How to Tell if Your Supplier’s Quality System Is Failing

A disruption or deterioration in supplier 
quality can affect a manufacturer's
entire supply chain.

by David R. Butcher

Marketing Communications, MasterControl


A complex global supply chain combined with strict quality and compliance requirements on upstream activities is compounding manufacturers’ efforts to ensure they are sourcing quality materials for their products. For life sciences companies, where precision is critical, the slightest variation in materials sourced, equipment used or processes followed can leave a path of disaster in its wake – from nonconforming materials and out-of-specification products to production downtime and product recalls.

May 26, 2016

Top 5 Medical Device Trends of 2016


Are you ready to meet the top challenges of 2016?

By Lisa Weeks, Marketing Communications, MasterControl


Ben Franklin said, “When you’re finished changing, you’re finished.” That’s advice medical device makers can take to heart because 2016 really is shaping up to be a year of unprecedented industry change. Non-traditional medical device companies, such as Google and Apple, are entering the space, disrupting the business models of major industry players. The explosion of consumers interacting with brands on Facebook, Twitter and other social platforms is forcing device makers (and regulators) to get serious about social media, specifically how they engage sponsors, correct misinformation and field off-label requests. Outdated IT infrastructures and increased cybersecurity threats are sabotaging operational and compliance efforts. Beyond all of this is a regulatory environment in an unprecedented state of flux. Here are five trends likely to affect the medical device industry this year. Note: This post is an excerpt from the white paper, “5 Trends Medical Device Companies Can’t Afford to Ignore in 2016,” which you can download here

May 24, 2016

Accelerate Time-to-Market by Improving Process Validation

In the eyes of the FDA and other regulatory 
bodies, inadequate documentation is unacceptable.

by James Jardine, Marketing Communications, MasterControl


Process validation, a general term for critical disciplines such as risk mitigation/management, quality assurance and change management, is something that far too many life science manufacturers only worry about when a product is just about to go to market. That late in the game, though, it can be hard to produce the required and relevant information that has accumulated during years of product development. In a recent article in PharmTech titled “Reducing the Documentation Burden in Process Validation,” Patricia Santos-Serrao, RAC, of MasterControl explains how regulatory agencies define process validation as it pertains to the collection and evaluation of data from the process design stage all the way through to commercial production. 

May 19, 2016

SOP Revision SWAT-Style

You can SWAT your SOPs using 
the procedure outlined below.

by Laurie Meehan

Social Media Manager

Polaris Compliance Consultants, Inc.


SOP revision. It falls somewhere between income tax prep and colonoscopy prep on the likability scale.  So why would you want to read about it?  Maybe you’re hoping someone’s figured out a way to make the process more efficient and less painful.  Maybe we have.

The SWAT Technique


Last month, we worked with a company to revise a set of SOPs (standard operating procedures) using a technique we call SWAT.  (Any edgy appeal that name might have otherwise had will be immediately dulled by its acronym expansion: “SOP Working Analysis Team.”  It’s the best we could do.  Don’t judge.)

The goal of the SWAT technique is to revise the most documents in the least time, while preserving friendships, sobriety, and original hair color.  The heart of SWAT is an immersive, multi-day working session in which participants discuss SOP revisions and incorporate them in real time.  Careful planning, thorough preparation, and commitment from management and participants are keys to keeping the SWAT session productive.

May 17, 2016

Five Reasons Why TMF Training is Important

Providing employees with the proper training 
takes time but pays off when it's time to
prove your TMF is inspection ready.

by Sholeh Ehdaivand

President and CEO

LMK Clinical Research Consulting


Training is a vital component of workplace efficiency especially when it comes to one of the most important deliverables of a clinical trial – the Trial Master File (TMF). Perhaps that’s why, according to a recent article in Forbes magazine, U.S. companies spent over $70 billion on corporate training in 2014, an increase of 15% over the previous year.  If you are lucky enough to oversee the TMF, you spend so much time bringing the right employees on board, it only makes sense you would understand the importance of providing them with the proper training to ensure your TMF is always inspection ready. 

May 12, 2016

The FDA Just Completed Its Inspection...Now What?


by David R. Butcher

Marketing Communications, MasterControl


Even after an FDA investigator has completed an inspection at your facility, there’s still plenty of work that remains. At the conclusion of an audit, the inspector will hold an exit interview to discuss observations and present significant findings on a Form 483. What do you do next?

In the second installment of an ongoing webinar series on FDA inspections, ARC Experts President and CEO Walt Murray, a consultant with more than 30 years of experience in quality management and regulatory affairs, recently offered some ideas about what steps to take after an FDA investigator has finished an inspection, issued a 483 and left your facility.

May 10, 2016

Need Help Navigating UDI? FDA Can Help

Free UDI training is available 
on FDA's website

Compiled from MedTech Intelligence
and FDA reports

Although the unique device identification (UDI) rule was finalized in September 2013, the compliance rollout period will last several years (based on device classification).  To help companies as the rule is phased in, FDA has posted five new education modules.  You can find these on the CDRH Learn site.

More UDI information is available in a previous GxP Lifeline blog post.  








May 5, 2016

Cleanroom Compliance: How to Address Common Challenges in Document Control

by Dave Hunter

Product Management Director 

MasterControl 

 

This is an excerpt from an article published in the March 2016 issue of Controlled Environments.

A recent warning letter to a medical device firm shows the importance of proper documentation of cleanroom maintenance procedures and corresponding control of those documents. The FDA noted the company’s failure to establish and maintain written procedures for avoiding contamination of equipment, as well as the incongruity between some of its cleanroom procedures and records of actual practice (1).

For companies regulated by the U.S. Food and Drug Administration (FDA), requirements pertaining to cleanroom and controlled environment procedures can be found in predicate rules such as 21 CFR Part 211 for pharmaceutical companies and 21 CFR Part 820 for medical device manufacturers (2).

May 3, 2016

Top 10 Medical Device Inventions Critical to Parenting

The forehead thermometer is on 
the author's list as a top 10 medical 
device invention for parents.

by Robyn Barnes

Marketing Communications

MasterControl


I’m a medical device article junkie and I love all those “Top 10” lists that everyone publishes.  Recently I saw one entitled “Top 50 Medical Device Inventors of All Time.” Nice article but it had a few flaws.  First, most of the inventors were men.  Who doesn’t know that necessity is the mother of invention?
 
In that same vein, as I perused the list, I noticed that not one of the inventions is something I’d ever use at home on my son.  While I certainly appreciate the importance of the full-body MRI, I don’t keep one around the house.

So I’ve compiled my own “Top 10 Medical Device Inventions” critical to parenting, in no particular order.  See how many of these you use on a weekly basis: